Ελληνικα
Stainless steel
SPAX? – D
The solution for orderly outdoor processing
With the aid of the milling ridges on the head, the SPRX? countersinks almost automatically.
The Fillister head applies force, preventing the blade from slipping and ensuring an ideal distribution of force. The CUT tip makes for quick and neat processing and no splitting.
Faultless appearance outdoors. Stainless steel means there are no traces of rust and no rusty screw heads.
Dimensions 5×50, 5×60, 5×70, 5×80. The wooden exterior is firmly in place on the subconstruction. Wood is tightly joined in a vice-type effect.
Easy fastening of screws – even with hard wood types
**Pre-drilling is recommended for hardwoods
SPAX? – D A2
The unique decking screw for wooden terraces.
– Patented ground serrations on the lower thread remove
the need for pre-drilling*
– Non threaded shank allows two materials to be pulled together
tightly
– Upper thread locks the deck-board securely down tight
* We recommend pre-drilling in hardwoods
SPAX? – D A4
The unique decking screw for wooden terraces.
Particularly well suited for coastal areas.
– Patented ground serrations on the lower thread remove
the need for pre-drilling*
– Non threaded shank allows two materials to be pulled together
tightly
– Upper thread locks the deck-board securely down tight
– Permanent protection against corrosion
* We recommend pre-drilling in hardwoods
Post screw
Self-tapping post screw
The post screw is intended for outdoor wooden construction.
Used for binding joist fastenings, post supports, post anchorage,
screw-in and hammer-in floor sleeves.
– No rust marks, no rusted screw heads
– Centring head for drilled hole= 10.5 mm
– No pre-drilling required
– Dimensions: 8.0 x 50 mm, T40 bit, R2, CUT point
Fence fasteners
Self-tapping fence fasteners
Fence fasteners for linking wooden fence sections outdoors.
Bracket with slit for adjusting gap on fence side.
Stainless steel bracket and screws.
– Dimensions: 7.0 x 35 mm, T30 Bit, 02, CUT point
– Stainless steel bracket with slit for adjusting gap
on fence side.
A2 with CUT point for wooden building front
No splitting or bulging in the material – the CUT point cleanly separates the wood fibers. Flush countersinking due to flat head with ribbed underside. Perfect for tongue-and-groove
fastening.
Other benefits of SPAX? for panels and fronts:
– Exact screw positioning due to special CUT point.
– Approved by German building authorities.
– No pre-drilling needed in softwood.